Year: 2018

Ball  Mill is an efficient tool for grinding many materials into fine powder. The Ball Coal Millis used to grind many kinds of raw materials. There are two ways of grinding: the dry process and the wet process. It can be divided into tubular type and flowing type according to different forms of discharging material. […]

The topic of this project is STEERING CONTROLLED HEADLIGHT, that is usually a separate set of headlight fitted to road vehicles beside the usual low beam/high beam fog lamps and their feature is that they turn with the steering, so that the driver of the vehicle can see the bend, what he is actually turning. The […]

The topic of this project is steering control fog lamps, that are usually a separate set of fog lamps fitted to road vehicles beside the usual low beam/high beam fog lamps and their feature is that they turn with the steering, so that the driver of the vehicle can see the bend, what he is […]

Screw jacks are typically used for shop work, rather than as an emergency jack to be carried with the vehicle. Use of jacks not designed for a specific vehicle requires more than the usual care in selecting ground conditions, the jacking point on the vehicle, and to ensure stability when the jack is extended. A […]

Hydraulic jacks are typically used for shop work, rather than as an emergency jack to be carried with the vehicle. Use of jacks not designed for a specific vehicle requires more than the usual care in selecting ground conditions, the jacking point on the vehicle, and to ensure stability when the jack is extended. This […]

here has been significant research going for Green Energy Solution. The objective of this project is to generate energy from the moving traffic on the road. The horizontal roller is connected to the stepper motor. Whenever vehicles pass through the road, the horizontal roller will rotate, the stepper motor will convert mechanical energy into electrical […]

There has been significant research going for Green Energy Solution. The objective of this project is to generate energy from the moving traffic on the road. The horizontal roller is connected to the stepper motor. Whenever vehicles pass through the road, the horizontal roller will rotate, the stepper motor will convert mechanical energy into electrical […]

Whenever the vehicle is allowed to pass over the dome, it gets pressed downwards. As the springs are attached to the dome, they get compressed and the rack, which is attached to, the bottom of the dome moves down in the reciprocating motion. Since rack has teeth connected to gear there is a conversion of […]